.38 Special Snap Caps V1.5
about
.38 Spl V1.5: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a .38 Spl cartridge. This 3DP design was originally published on 10/10/2020.
Update: Organized files to current 3FTech data pack format. Added Overview.txt file, added CAD work environment image.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm - .14mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
files
| File | Extension |
|---|---|
| 38 Spl Snap Caps V1.6.4.zip | zip |
versions
Version: .38 Spl Dummy Cartridge V1.6.4 latest
.38 Spl Dummy Cartridge V1.6.4: Laffs Dynamics
3D printed snap caps, dimensions of a .38 Spl cartridge. This 3DP design was originally published on 10/10/2020.
Update 1.5.4: Updated designation, changed to current designer's name, updated print settings to current standards set by designer. Reduced
image count.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%+
Infill Pattern: Gyroid
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
Version: 1.0.0
Initial release
about
.38 Spl V1.5: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a .38 Spl cartridge. This 3DP design was originally published on 10/10/2020.
Update: Organized files to current 3FTech data pack format. Added Overview.txt file, added CAD work environment image.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm - .14mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
creator
Metrics
Views
3.3K
Downloads
322
Project Info
release date
Apr 25, 2024
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| 38 Spl Snap Caps V1.6.4.zip | zip |
versions
Version: .38 Spl Dummy Cartridge V1.6.4 latest
.38 Spl Dummy Cartridge V1.6.4: Laffs Dynamics
3D printed snap caps, dimensions of a .38 Spl cartridge. This 3DP design was originally published on 10/10/2020.
Update 1.5.4: Updated designation, changed to current designer's name, updated print settings to current standards set by designer. Reduced
image count.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 50%+
Infill Pattern: Gyroid
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
