M-Lok - Picatinny Adaptor Rail (5 Slot)
about
M-Lok - Picatinny Adaptor Rail (5 Slot) by FFFTech/FFFTechnology A 5 slot picatinny rail that attaches to M-Lok rails. To be used if one wishes to use an accessory such as a light mount or foregrip that is only picatinny mount compatible. Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 204C Bed: 56C First Layer Print Height: .18mm Standard Layer Height: .14mm Wall Thickness: .40mm Wall Perimeters: 6 Infill: 40% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 26% Scale the model +/- .01%, depending on your printers manufacturing parameters and depending on the plastic shrink percentage. (PLA shrinks about 5%) Because the rail will need to withstand heavy leverage forces (Like using a foregrip and the like.) It's HIGHLY advised you use the settings stated above. Hardware Needed: 2x M5x10 Hex Screw 2x M-Lok T-Nuts
files
| File | Extension |
|---|---|
| M-Lok - Picatinny 5 Slot Rail 1.1.3.zip | zip |
versions
Version: M-Lok - Picatinny Rail (5 Slot) V1.1.3 latest
M-Lok - Picatinny Rail (5 Slot) V1.1.3: Laffs Dynamics
A 5 slot picatinny rail that attaches to M-Lok mounting slots. To be used if one wishes to use an accessory such
as a light mount or foregrip that is only picatinny mount compatible.
Update V1.1.3: Added countersunk pockets to allow mount clearance for accessories from the M-Lok mounting bolts.
Changed designer name. Changed recommended print settings. Removed unnecessary document text.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40mm
Wall Perimeters: 6
Infill: 40%+
Support Material Percentage: 22%
Hardware Needed:
2x M5x10 Hex Screw
2x M-Lok T-Nuts
Version: 1.0.0
Initial release
about
M-Lok - Picatinny Adaptor Rail (5 Slot) by FFFTech/FFFTechnology A 5 slot picatinny rail that attaches to M-Lok rails. To be used if one wishes to use an accessory such as a light mount or foregrip that is only picatinny mount compatible. Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 204C Bed: 56C First Layer Print Height: .18mm Standard Layer Height: .14mm Wall Thickness: .40mm Wall Perimeters: 6 Infill: 40% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 26% Scale the model +/- .01%, depending on your printers manufacturing parameters and depending on the plastic shrink percentage. (PLA shrinks about 5%) Because the rail will need to withstand heavy leverage forces (Like using a foregrip and the like.) It's HIGHLY advised you use the settings stated above. Hardware Needed: 2x M5x10 Hex Screw 2x M-Lok T-Nuts
creator
Metrics
Views
3.3K
Downloads
919
Project Info
release date
Jun 10, 2023
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| M-Lok - Picatinny 5 Slot Rail 1.1.3.zip | zip |
versions
Version: M-Lok - Picatinny Rail (5 Slot) V1.1.3 latest
M-Lok - Picatinny Rail (5 Slot) V1.1.3: Laffs Dynamics
A 5 slot picatinny rail that attaches to M-Lok mounting slots. To be used if one wishes to use an accessory such
as a light mount or foregrip that is only picatinny mount compatible.
Update V1.1.3: Added countersunk pockets to allow mount clearance for accessories from the M-Lok mounting bolts.
Changed designer name. Changed recommended print settings. Removed unnecessary document text.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40mm
Wall Perimeters: 6
Infill: 40%+
Support Material Percentage: 22%
Hardware Needed:
2x M5x10 Hex Screw
2x M-Lok T-Nuts
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
