This rail cover is inspired by classic Greco-Roman doric columns.
This is intended to cover a classic quad rail for an ar15. It is 38mm wide and based on the footprint of a milspec KAC rail cover. It comes in increments adjustable from 60mm and above in 20mm increments.
The cracks between columns are 6mm long and they will not cover the opposite side of a rail if opposing directions are not used.
This rail cover does not rely on a fragile printed detent or hardware that must be sought elsewhere, and is a press fit design. Print the smallest 20mm section as a test part and adjust scale for whatever fit you deem the best, whether it is permanant or you intend to retain it with an accessory on either end.
If there is demand or further monetary pledges I will draft a matching picatinny grip or different sized panels.
Please practice caution or common sense when it comes to short barrels and loose fitting grips.
Initial release