AMDesque AKM Grip V1.1: FFFTech/FFFTechnology & Caska444
A design that mimics the look and feel of the AMD-65 plastic grip. Unlike it's wood counterpart
on the AKM-63 (No, not AMD-63) the plastic grip on the AMD-65 has a metal plate and short screw that attaches to the grip nut.
This design has overall shape of the OEM plastic grip, but allows the use of standard long AKM
attachment screws.
Update V1.1: Changed internal reinforcement structure to allow for Yugo AK grip screw mounting angle.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 215C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Accreditation:
Caska444: For requesting the design, as well as providing an original Hungarian AMD-65 grip for the designerto measure and reference the design from. As well as the designer, Caska444 printed the grip to check for aesthetics and durability.
Initial release