T-mag Magazine Pack for S&W M&P9 Pistols
about
Version 2 of the T-Mag S&W M&P pistol magazine pack for flush fit 17-round, 21-round, and 30-round capacities. Includes annealing tools.
**Change Log**
- Follower geometry revised to address unreliable last round hold open and occasional hang-up on left side mag catch cutout. Also improves feeding reliability and eliminates the need for a speed loader while loading.
- Relief cuts added to shoulder section of magazine body to improve clearance for slide lock and trigger bar.
- Relief cut added to inside of magazine body to improve slide lock engagement with follower.
- X and Y dimensions increased by 0.5% to improve cold weather performance.
- Added right-hand only versions of each body.
- Removed non-witness hole versions.
- Added annealing tools and instructions, see separate readme.
- Added material recommendations.
files
| File | Extension |
|---|---|
| T-mags for MP v1.0.zip | zip |
versions
Version: 1.0.0-corrected latest
Corrected the upload
Version: 1.0.0
Initial release
about
Version 2 of the T-Mag S&W M&P pistol magazine pack for flush fit 17-round, 21-round, and 30-round capacities. Includes annealing tools.
**Change Log**
- Follower geometry revised to address unreliable last round hold open and occasional hang-up on left side mag catch cutout. Also improves feeding reliability and eliminates the need for a speed loader while loading.
- Relief cuts added to shoulder section of magazine body to improve clearance for slide lock and trigger bar.
- Relief cut added to inside of magazine body to improve slide lock engagement with follower.
- X and Y dimensions increased by 0.5% to improve cold weather performance.
- Added right-hand only versions of each body.
- Removed non-witness hole versions.
- Added annealing tools and instructions, see separate readme.
- Added material recommendations.
creator
Metrics
Views
4.7K
Downloads
666
Project Info
release date
Jun 30, 2022
artifact type
Printable project
library category
Printable Magazines
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial 4.0 International
Firearm Info
type
Pistol
caliber
9x19mm
files
| File | Extension |
|---|---|
| T-mags for MP v1.0.zip | zip |
versions
Version: 1.0.0-corrected latest
Corrected the upload
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
