Khokhlo Archive (хохлоархив)

Filament Types: PLA, ABS, PETG

Resolution:

Nozzle diameter: 0.4-0.6

Layer height: 0.38 and less

Wall lines count: 3

Infill: 30

Top layers: 3

Bottom layers: 3

Supports: false

Description:

The optimal thickness of the layer for printing the cover is 0.1-0.15 mm, the body - according to the parameters specified in the Technical Specifications.

Printing of the main body with any layer thickness using adaptive layers on the threaded part (no more than 0.15 mm)

Quality checks:

to check the thread in the cover, there is a PLUG file, print it once, you only need it to check the cover

the cap itself must be wound completely and tightly

the most important element: check the tightness, pour water into the outer cavity and let it stand for an hour, if a few drops have leaked into the inner cylinder, you can print, if there is water, adjust the printer, it is a defect

the most versatile settings are 0.1 layer, the cover, the main part, 0.2, and where there is a thread, an adaptive layer of 0.1, if the seam tears, you can find the shift of the inner seam relative to the outer one in the slicer, this can prevent leakage

ONE KEY IS REQUIRED PER LOT.