Biden Double Barrel Shotgun Pistol
about
# Biden Double Barrel Shotgun Pistol
#### Author
Proteus
#### Version
1.0
#### Description
* "Vice President Approved!"
* Caliber: .45 Long Colt / .410 Shotshell
#### Instructions
Print the all parts in the folder as well as the following Liberator parts: two triggers, two hammers, two hammer bodies, 6 frame pins, 1 grip pin, 4 hammer springs, 2 trigger springs, 2 firing pins, 2 firing pin bushings.
Assemble as you would a liberator but doubled. Put the barrelpin2 into the hinge connecting the barrel to the frame, and the barrelpin into the hole ontop locking the barrel in place.
It is reccomended that you use a .410 shotshell that uses a slug as opposed to shot in this design.
To operate, swing down the barrel and load two rounds. Close the barrel completely and fit the larger pin into place connecting it to the frame. Fire.
UNTESTED.
files
| File | Extension |
|---|---|
| Baby_Biden_Pistol_v1.0-Proteus.rar | rar |
versions
Version: 1.0.0 latest
Initial Release
about
# Biden Double Barrel Shotgun Pistol
#### Author
Proteus
#### Version
1.0
#### Description
* "Vice President Approved!"
* Caliber: .45 Long Colt / .410 Shotshell
#### Instructions
Print the all parts in the folder as well as the following Liberator parts: two triggers, two hammers, two hammer bodies, 6 frame pins, 1 grip pin, 4 hammer springs, 2 trigger springs, 2 firing pins, 2 firing pin bushings.
Assemble as you would a liberator but doubled. Put the barrelpin2 into the hinge connecting the barrel to the frame, and the barrelpin into the hole ontop locking the barrel in place.
It is reccomended that you use a .410 shotshell that uses a slug as opposed to shot in this design.
To operate, swing down the barrel and load two rounds. Close the barrel completely and fit the larger pin into place connecting it to the frame. Fire.
UNTESTED.
creator
organization
Metrics
Views
4.5K
Downloads
422
Project Info
release date
Feb 20, 2020
artifact type
Printable project
library category
Printable Firearms
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
No license
Firearm Info
type
Pistol
platform
Liberator
calibers
.45 Long Colt, .410 Bore
version hash
QmZen3GcQHjfDZu5SJugC7BTn9nhA4s5LB2L8UZFkr73Gs
files
| File | Extension |
|---|---|
| Baby_Biden_Pistol_v1.0-Proteus.rar | rar |
versions
Version: 1.0.0 latest
Initial Release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
