3FTech M-Lok Slot Covers

ATTENTION: this project has been marked as deprecated. This may mean that the project is considered unsafe, is not representative of a developer's newer work, or it does not meet modern guncad standards. For historical purposes it remains available for download.

about

3FTech M-Lok Slot Covers: FFFTech/FFFTechnology I really don't know why people like these, it's not like the M-Lok slots get in the way of anything. Oh well. They're covers. They attach via two M5 screws and t nuts. Four variants are available: * Single Slot Cover * 1.5 Slot Cover * 2 Slot Cover * 3 Slot Cover Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 210C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40mm Wall Perimeters: 4 -5 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 30% Hardware Needed: 2x M5x10 Hex Socketed Machine Screw/Bolt 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)

files

File Extension
3FTech M-Lok Covers.zip zip

versions

Version: 1.0.0 latest

Initial release

about

ATTENTION: this project has been marked as deprecated. This may mean that the project is considered unsafe, is not representative of a developer's newer work, or it does not meet modern guncad standards. For historical purposes it remains available for download.

3FTech M-Lok Slot Covers: FFFTech/FFFTechnology I really don't know why people like these, it's not like the M-Lok slots get in the way of anything. Oh well. They're covers. They attach via two M5 screws and t nuts. Four variants are available: * Single Slot Cover * 1.5 Slot Cover * 2 Slot Cover * 3 Slot Cover Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 210C Bed: 56C First Layer Print Height: .20mm Standard Layer Height: .14mm Wall Thickness: .40mm Wall Perimeters: 4 -5 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Support Material Percentage: 30% Hardware Needed: 2x M5x10 Hex Socketed Machine Screw/Bolt 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)

download

Metrics

Views

2.1K

Downloads

459

Project Info

release date

Oct 26, 2021

artifact type

Printable project

library category

Printable Peripherals / Parts

fabrication method

Primarily Printable

release country

United States

language

English

license

GNU General Public License v3.0

version hash

Qmco5c1eiHSLkoBYC5h3s8utMBhgEY99a3ppDZbropBVex

files

File Extension
3FTech M-Lok Covers.zip zip

versions

Version: 1.0.0 latest

Initial release

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.