This is the GhostBolt. A 3D printed AR15 straight pull bolt action upper that is compatible with most lowers including mil-spec. This upper can theoretically be chambered up to .458 SOCOM (Untested)
Because the upper is bolt action, there is no need for a buffer tube, meaning folding stocks are welcome!
This entire build can cost lower than 200 beans if you can shop around for parts
----Update 1.5----
-Added a lower to use
-Added a picatinny bridge to help with the handguard walking off the upper
-Added STEP files for the upper for all you remixing ladies out there
---ReadMe file for the GhostBolt: A Straight Pull AR-15 Upper---
-------UPDATE 1.5 NOTES------
Newly added stl's:
Picatinny Bridge (to bridge the upper to handguard to keep handguard from walking off while firing the gun due to vibration)
GhostBoltLowerV2 (My own twist on a what i like in a lower for the ghost bolt, or its just a picatinny lower for 22s)
Added the Step files for the upper for you who like to be creative out there
-------UPDATE 1.4 NOTES------
I have realized there is an issue with the handguard walking off while shooting the gun due to vibration and i am looking into this further. This isnt a major issue and the gun should still work properly and safely
-------UPDATE 1.3 NOTES------
- New Bolt Handle
- 3 New Handguards
- Bolt Carrier/Charging Handle Adjustment
DISCALIMER:
I AM NOT RESPONSEBLE FOR ANY INJURIES OR DAMAGES THAT MAY OCCUR WHEN BUILDING OR SHOOTING THIS PLATFORM.
BY DOWNLOADING AND BUILDING YOU ARE DOING SO AT YOUR OWN RISK.
PLEASE BE CAREFUL AND BUILD RESPONSIBLY
-----------------------------------------------------------------------------------------------------
ALWAYS TEST FIRE WITH A STRING AT A SAFE DISTANCE 10 TIMES BEFORE SHOULDER FIRING THE FIREARM
-----------------------------------------------------------------------------------------------------
This File Pack Includes the STLs for:
Bolt Carrier
Bolt Charging Handle
Upper Reciever
Barrel Nut
Handguard
GhostBolt 2-Piece Super Strong Stock/Brace System
GhostBolt Lower
Apple Pie Lower
If you have an Apple Pie parts kit designed by MiddletonMade and 3dArms then the only thing extra you will need for this
is a 2in 5/16 Socket Head Cap Bolt.
Hardware you will need:
1x - 2in 5/16 Socket Head Cap Bolt
1x - 5/16 Nut
4x - 8/32 Threaded Rods Cut to length (Rods being cut down is personal preference only, the handguard will cover them anyways)
8x - Lock Washers that fit 8/32
8x - 8/32 Nuts
4x - 30mm M5 Bolts
4x - M5 Nuts
Parts you will need:
------THIS IS NOT FOR AR10 PLATFORM-------
Ar15 Gas Block Only (Installed backwards/upsidedown to block gas port)
Ar15 Barrel - Caliber is your choice (AR-15 CALIBERS ONLY)
Corresponding Ar15 Bolt Head To fit caliber chose
Ar15 Firing Pin
Ar15 Firing Pin Retainer
Ar15 Bolt Cam
THIS UPPER IS DESIGNED TO FIT ANY MILSPEC AR15 LOWER, IF YOU CHOOSE THE APPLE PIE LOWER STL PROVIDED THEN THE NEEDED PARTS ARE AS FOLLOWS:
Ar15 Lower Parts Kit
Ar15 Fire control Group
IF USING MY CUSTOM DESIGNED STOCK/BRACE SYSTEM THEN YOU WILL NEED THE FOLLOWING:
1x 45mm M5 Bolt
1x M5 Nut
--------INSTRUCTIONS--------
Step 1:
Print. Everything. (Only Need 1 Handguard)
Step 2:
Install Barrel into upper and then slide barrel nut over barrel. Next there are slots for 4 nuts to go on each corner of the upper.
Slide the threaded rods into the holes and screw into each nut on the upper. Next slide the lock washers onto rods.
Now thread the 8/32 nuts over the lock washers and tighten evenly until you cant tighten any further.
(There should be no gap between upper and barrel nut)
Step 3:
Install Gas Block Backwards or Upsidedown to block gas port on barrel.
Slide handguard over barrel nut and insert 2 m5 bolts and nuts, and
tighten until the handguard is secured tightly on upper.
Next use the picatinny bride to connect the upper to the handguard,
this is to ensure the handguard doesnt walk off the upper due to vibration.
Step 4:
Insert Bolt head assembly into the bolt carrier, install cam, install firing pin, and then install firing pin retainer.
Step 5:
Screw 5/16 Bolt into Charging Handle until it wont screw in any further. Slide the 5/16 nut into the top of the bolt assembly.
Put bolt assembly into upper and screw charging handle into the side of the bolt.
Your Upper should now be complete. Follow separate instructions for whichever lower you choose to use.
For the ghost bolt lower you need a lower parts kit minus the last round bolt hold open, and assemble like normal.
Hope you enjoy the GhostBolt Beta!
Special Thanks to MiddletonMade and 3D Arms with their help in designing this project and its original form the Apple Pie!
If you haven't tried the Apple Pie go check it out today!
File | Extension |
---|---|
GhostBolt BETA 1.5.zip | zip |
Version: 1.5.0 latest
initial upload
This is the GhostBolt. A 3D printed AR15 straight pull bolt action upper that is compatible with most lowers including mil-spec. This upper can theoretically be chambered up to .458 SOCOM (Untested)
Because the upper is bolt action, there is no need for a buffer tube, meaning folding stocks are welcome!
This entire build can cost lower than 200 beans if you can shop around for parts
----Update 1.5----
-Added a lower to use
-Added a picatinny bridge to help with the handguard walking off the upper
-Added STEP files for the upper for all you remixing ladies out there
---ReadMe file for the GhostBolt: A Straight Pull AR-15 Upper---
-------UPDATE 1.5 NOTES------
Newly added stl's:
Picatinny Bridge (to bridge the upper to handguard to keep handguard from walking off while firing the gun due to vibration)
GhostBoltLowerV2 (My own twist on a what i like in a lower for the ghost bolt, or its just a picatinny lower for 22s)
Added the Step files for the upper for you who like to be creative out there
-------UPDATE 1.4 NOTES------
I have realized there is an issue with the handguard walking off while shooting the gun due to vibration and i am looking into this further. This isnt a major issue and the gun should still work properly and safely
-------UPDATE 1.3 NOTES------
- New Bolt Handle
- 3 New Handguards
- Bolt Carrier/Charging Handle Adjustment
DISCALIMER:
I AM NOT RESPONSEBLE FOR ANY INJURIES OR DAMAGES THAT MAY OCCUR WHEN BUILDING OR SHOOTING THIS PLATFORM.
BY DOWNLOADING AND BUILDING YOU ARE DOING SO AT YOUR OWN RISK.
PLEASE BE CAREFUL AND BUILD RESPONSIBLY
-----------------------------------------------------------------------------------------------------
ALWAYS TEST FIRE WITH A STRING AT A SAFE DISTANCE 10 TIMES BEFORE SHOULDER FIRING THE FIREARM
-----------------------------------------------------------------------------------------------------
This File Pack Includes the STLs for:
Bolt Carrier
Bolt Charging Handle
Upper Reciever
Barrel Nut
Handguard
GhostBolt 2-Piece Super Strong Stock/Brace System
GhostBolt Lower
Apple Pie Lower
If you have an Apple Pie parts kit designed by MiddletonMade and 3dArms then the only thing extra you will need for this
is a 2in 5/16 Socket Head Cap Bolt.
Hardware you will need:
1x - 2in 5/16 Socket Head Cap Bolt
1x - 5/16 Nut
4x - 8/32 Threaded Rods Cut to length (Rods being cut down is personal preference only, the handguard will cover them anyways)
8x - Lock Washers that fit 8/32
8x - 8/32 Nuts
4x - 30mm M5 Bolts
4x - M5 Nuts
Parts you will need:
------THIS IS NOT FOR AR10 PLATFORM-------
Ar15 Gas Block Only (Installed backwards/upsidedown to block gas port)
Ar15 Barrel - Caliber is your choice (AR-15 CALIBERS ONLY)
Corresponding Ar15 Bolt Head To fit caliber chose
Ar15 Firing Pin
Ar15 Firing Pin Retainer
Ar15 Bolt Cam
THIS UPPER IS DESIGNED TO FIT ANY MILSPEC AR15 LOWER, IF YOU CHOOSE THE APPLE PIE LOWER STL PROVIDED THEN THE NEEDED PARTS ARE AS FOLLOWS:
Ar15 Lower Parts Kit
Ar15 Fire control Group
IF USING MY CUSTOM DESIGNED STOCK/BRACE SYSTEM THEN YOU WILL NEED THE FOLLOWING:
1x 45mm M5 Bolt
1x M5 Nut
--------INSTRUCTIONS--------
Step 1:
Print. Everything. (Only Need 1 Handguard)
Step 2:
Install Barrel into upper and then slide barrel nut over barrel. Next there are slots for 4 nuts to go on each corner of the upper.
Slide the threaded rods into the holes and screw into each nut on the upper. Next slide the lock washers onto rods.
Now thread the 8/32 nuts over the lock washers and tighten evenly until you cant tighten any further.
(There should be no gap between upper and barrel nut)
Step 3:
Install Gas Block Backwards or Upsidedown to block gas port on barrel.
Slide handguard over barrel nut and insert 2 m5 bolts and nuts, and
tighten until the handguard is secured tightly on upper.
Next use the picatinny bride to connect the upper to the handguard,
this is to ensure the handguard doesnt walk off the upper due to vibration.
Step 4:
Insert Bolt head assembly into the bolt carrier, install cam, install firing pin, and then install firing pin retainer.
Step 5:
Screw 5/16 Bolt into Charging Handle until it wont screw in any further. Slide the 5/16 nut into the top of the bolt assembly.
Put bolt assembly into upper and screw charging handle into the side of the bolt.
Your Upper should now be complete. Follow separate instructions for whichever lower you choose to use.
For the ghost bolt lower you need a lower parts kit minus the last round bolt hold open, and assemble like normal.
Hope you enjoy the GhostBolt Beta!
Special Thanks to MiddletonMade and 3D Arms with their help in designing this project and its original form the Apple Pie!
If you haven't tried the Apple Pie go check it out today!
2.5K
516
Jan 18, 2024
3D Printer
United States
English
No license
File | Extension |
---|---|
GhostBolt BETA 1.5.zip | zip |
Version: 1.5.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.