Sentinel Grip V1.0.4: Laffs Dynamics
Update V1.0.4: Redesignated grip design. Updated designer name. Updated print settings for the more common Ender 3 3D printer. Removed redundant files.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18% (Only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
File | Extension |
---|---|
Sentinel Grip V1.0.4.zip | zip |
Version: Sentinel Grip V1.0.4 latest
Sentinel Grip V1.0.4: Laffs Dynamics
Update V1.0.4: Redesignated grip design. Updated designer name. Updated print settings for the more common Ender 3
3D printer. Removed redundant files.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18% (Only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Version: 1.0.0
Sentinel Grip V1.0.4: Laffs Dynamics
Update V1.0.4: Redesignated grip design. Updated designer name. Updated print settings for the more common Ender 3 3D printer. Removed redundant files.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18% (Only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
3.1K
Feb 01, 2023
United States
English
File | Extension |
---|---|
Sentinel Grip V1.0.4.zip | zip |
Version: Sentinel Grip V1.0.4 latest
Sentinel Grip V1.0.4: Laffs Dynamics
Update V1.0.4: Redesignated grip design. Updated designer name. Updated print settings for the more common Ender 3
3D printer. Removed redundant files.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 38%+
Support Material Percentage: 18% (Only needed for the top/rear of the grip.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.