Rook AKM Grip V1.1: FFFTech/FFFTechnology
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
File | Extension |
---|---|
Rook AKM Grip V1.1.zip | zip |
Version: 1.0.0 latest
Initial release
Rook AKM Grip V1.1: FFFTech/FFFTechnology
An AKM grip with a straight backstrap and frontal section. Has ridges down the front, with an outwards extended toe.
A thumb rest is modeled into the left side of the grip. (See Note Below)
Overall thickness is 25.2mm
Update V1.1: Removed reinforcements.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
Notes:
1) For left handed shooters, simply use the "Mirror" setting in your preferred slicer software, so the thumb rest is
on the right side of the grip.
1.5K
Jul 25, 2022
3D Printer
United States
English
QmavBd8XmCCYva8JJKUirqwWvCeHS9Vc5CgEzju1kUyP9A
File | Extension |
---|---|
Rook AKM Grip V1.1.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.