Unseenkiller - Rook Telescoping Stock and Brace
about
Releasing by request, the Knight telescoping stock and brace adapted for use in the Rook
NOTE - you MUST use the pic rail from THIS RELEASE, you cannot use your old Rook's rear picatinny rail!!
2x - M5-35 SHCS screws
2x - M5 Hex Nuts
4x - #8-32 hex nuts (if not using M4)
2x - 11" of #8-32 threaded rod (if not using M4) and nuts
2x - 11" of M4 threaded rod (if not using #8-32) and nuts
1x - 8mm x 20mm die cut spring (cut in half)
files
| File | Extension |
|---|---|
| STL/Stock - 8-32.stl | stl |
| STL/Stock - M4.stl | stl |
| STL/Sleeve - Right.stl | stl |
| STL/Sleeve - Left.stl | stl |
| STL/Pic Mount.stl | stl |
| STL/Rear Pic Rail.stl | stl |
| STL/Locking Bar.stl | stl |
| STL/Brace - M4.stl | stl |
| STL/Brace - 8-32.stl | stl |
| STL/Bar Stopper - Right.stl | stl |
| STL/Bar Stopper - Left.stl | stl |
| STEP/Unseenkiller - Rook Telescoping Stock and Brace v1.step | step |
| STEP/Unseenkiller - Rook Telescoping Stock and Brace v1.f3d | f3d |
| Render/Render (1).PNG | PNG |
| Render/Render (5).png | png |
| Render/Render (2).png | png |
| Render/Render (3).png | png |
| Render/Render (4).png | png |
| 3MF/Unseenkiller - Rook Telescoping Stock and Brace.3mf | 3mf |
| ReadMe.txt | txt |
versions
Version: 1.0.0 latest
initial upload
about
Releasing by request, the Knight telescoping stock and brace adapted for use in the Rook
NOTE - you MUST use the pic rail from THIS RELEASE, you cannot use your old Rook's rear picatinny rail!!
2x - M5-35 SHCS screws
2x - M5 Hex Nuts
4x - #8-32 hex nuts (if not using M4)
2x - 11" of #8-32 threaded rod (if not using M4) and nuts
2x - 11" of M4 threaded rod (if not using #8-32) and nuts
1x - 8mm x 20mm die cut spring (cut in half)
creator
Metrics
Views
848
Downloads
42
Project Info
mod parent
release date
Feb 24, 2025
artifact types
CAD Object, Stereolithic object
library category
fabrication method
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| STL/Stock - 8-32.stl | stl |
| STL/Stock - M4.stl | stl |
| STL/Sleeve - Right.stl | stl |
| STL/Sleeve - Left.stl | stl |
| STL/Pic Mount.stl | stl |
| STL/Rear Pic Rail.stl | stl |
| STL/Locking Bar.stl | stl |
| STL/Brace - M4.stl | stl |
| STL/Brace - 8-32.stl | stl |
| STL/Bar Stopper - Right.stl | stl |
| STL/Bar Stopper - Left.stl | stl |
| STEP/Unseenkiller - Rook Telescoping Stock and Brace v1.step | step |
| STEP/Unseenkiller - Rook Telescoping Stock and Brace v1.f3d | f3d |
| Render/Render (1).PNG | PNG |
| Render/Render (5).png | png |
| Render/Render (2).png | png |
| Render/Render (3).png | png |
| Render/Render (4).png | png |
| 3MF/Unseenkiller - Rook Telescoping Stock and Brace.3mf | 3mf |
| ReadMe.txt | txt |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
