Unseenkiller - UFG9

about

The UFG9

By: unseenkiller

 

--------------------------------------------------

 

Intro

 

The UFG9 - A Brief History

 

Originally named the 3DFMG, I changed it because the Magpul FMG folded in half using a clamshell design. Since this model doesn't resemble the FMG closely enough, it needed a new name: Under Folding Glock 9 (UFG9).

 

The design resembles a briefcase, toolbox, or lunchbox, and is spring-loaded to assist in opening. It includes rails compatible with PY2A, FMDA, and P80 platforms.

 

Recommended Rails:

- Printyour2a.com (PY2A)

- Riptiderails.com (FMDA)

- JSD Supply

- Rook Tactical (for P80)

 

Note:

This design was beta tested and hosted by a design group who has requested to have their name not be associated with this release, out of respect for their wishes that has been done.

 

--------------------------------------------------

 

Beta Testers - Credit

 

Special thanks to our beta testers:

- MudFence

- Blinsky

- sonofdirtysouth

- the_ghost_of_jedi_revan

- thekid

- synergy

- the_lorax

- sayitaintsojoe

- akcom

- DeafEcho

- KYGS666

- 300norma

 

Alpha Testers (the brave and trusted few)

 

- pla_ak_ak_ak

- eyezeeeeye

- festiva3D

- theKid

 

--------------------------------------------------

 

Bill of Materials (BOM)

 

Parts needed for this build:

- 1x 1.5" Mortise-Mount Hinge (e.g., McMaster Model 1598A14)

- 1x Glock 19 (all parts)

- 1x set of Glock 19 Gen3 rails (P80, FMDA, or PY2A)

- 1x 8mm x 20mm spring (e.g., Ender 3 bed spring)

- 1x AR-15 Buffer Detent Spring

- 1x Glock 19 Magazine Spring (cut in half)

- 15x M3 nuts

- 1x M3-12 SHCS

- 5x M3-25 SHCS

- 9x M3-35 SHCS

- 4x M4 nuts

- 2x M4-30 SHCS

- 2x M4-35 SHCS

- 4x M5 nuts

- 2x M5-20 SHCS

- 2x M5-30 SHCS

- Optional (but recommended): End Plate Charging Handle from Tactical Galaxy

 

Recommended Kits:

- Parts Dispensed - https://parts-dispensed.com/

- Trollwerks - https://trollwerks2a.com

- Desert 3D Designs - https://desert3ddesigns.com/shop/

 

--------------------------------------------------

 

Build Instructions

 

Printing:

1. Print all items with 8 walls and 100% infill.

2. Refer to the print orientation pictures for build plate orientations.

 

Gun Assembly:

This is a standard Glock 19 Gen 3 build, using a Gen 5 takedown spring instead of the flat Gen 3 version.

Important: Install the charging handle before assembling anything else. A charging handle is essential for racking the slide.

 

AFG Prep:

1. Cut a Glock 15rd magazine spring in half.

2. Insert the mag spring into the AFG mount.

3. Insert the AFG grip into the mount (do not compress).

4. Secure with M3-35 SHCS and a nut.

5. Attach to the frame picatinny rail with M5-35 SHCS and nuts.

 

Carry Handle:

1. Compress Left and Right Releases together through the carry handle holes, with the rounded face forward.

2. Join left and right releases with 2x M3-35 SHCS and nuts.

3. Place AR-15 Buffer Detent Spring in the Carry Handle Spring Detent, and pass both through the front hole with the spring facing forward.

4. Secure with the Carry Handle Spring Retainer and M3-12 SHCS and nut.

5. Attach carry handle with 3x M3-35 SHCS and nuts.

 

Folder:

1. Insert an M3-25 SHCS and nut into the latch cavity of the Folder Pivot.

2. Attach the 1.5" hinge, with the protruding side of the hinge away from the model, using M4 nuts and bolts.

3. Attach the Folder Pivot to the frame and carry handle with 2x M5-20 SHCS and a nut in the rear.

4. Bolt the other hinge flap to the Folder Spine using M4-35 SHCS and nuts.

5. Place an Ender bed spring on the Folder Spine hole, place the Release Latch on the spring, and secure with 2x M3-35 SHCS and nuts.

6. Attach the shell (stock or brace or otherwise) of your choosing to the Folder Spine with 4x M3-25 SHCS and nuts.

 

Important: Don't shoot your eye out!

files

File Extension
Unseenkiller - UFG9.zip zip

versions

Version: 1.0.0 latest

initial upload

about

The UFG9

By: unseenkiller

 

--------------------------------------------------

 

Intro

 

The UFG9 - A Brief History

 

Originally named the 3DFMG, I changed it because the Magpul FMG folded in half using a clamshell design. Since this model doesn't resemble the FMG closely enough, it needed a new name: Under Folding Glock 9 (UFG9).

 

The design resembles a briefcase, toolbox, or lunchbox, and is spring-loaded to assist in opening. It includes rails compatible with PY2A, FMDA, and P80 platforms.

 

Recommended Rails:

- Printyour2a.com (PY2A)

- Riptiderails.com (FMDA)

- JSD Supply

- Rook Tactical (for P80)

 

Note:

This design was beta tested and hosted by a design group who has requested to have their name not be associated with this release, out of respect for their wishes that has been done.

 

--------------------------------------------------

 

Beta Testers - Credit

 

Special thanks to our beta testers:

- MudFence

- Blinsky

- sonofdirtysouth

- the_ghost_of_jedi_revan

- thekid

- synergy

- the_lorax

- sayitaintsojoe

- akcom

- DeafEcho

- KYGS666

- 300norma

 

Alpha Testers (the brave and trusted few)

 

- pla_ak_ak_ak

- eyezeeeeye

- festiva3D

- theKid

 

--------------------------------------------------

 

Bill of Materials (BOM)

 

Parts needed for this build:

- 1x 1.5" Mortise-Mount Hinge (e.g., McMaster Model 1598A14)

- 1x Glock 19 (all parts)

- 1x set of Glock 19 Gen3 rails (P80, FMDA, or PY2A)

- 1x 8mm x 20mm spring (e.g., Ender 3 bed spring)

- 1x AR-15 Buffer Detent Spring

- 1x Glock 19 Magazine Spring (cut in half)

- 15x M3 nuts

- 1x M3-12 SHCS

- 5x M3-25 SHCS

- 9x M3-35 SHCS

- 4x M4 nuts

- 2x M4-30 SHCS

- 2x M4-35 SHCS

- 4x M5 nuts

- 2x M5-20 SHCS

- 2x M5-30 SHCS

- Optional (but recommended): End Plate Charging Handle from Tactical Galaxy

 

Recommended Kits:

- Parts Dispensed - https://parts-dispensed.com/

- Trollwerks - https://trollwerks2a.com

- Desert 3D Designs - https://desert3ddesigns.com/shop/

 

--------------------------------------------------

 

Build Instructions

 

Printing:

1. Print all items with 8 walls and 100% infill.

2. Refer to the print orientation pictures for build plate orientations.

 

Gun Assembly:

This is a standard Glock 19 Gen 3 build, using a Gen 5 takedown spring instead of the flat Gen 3 version.

Important: Install the charging handle before assembling anything else. A charging handle is essential for racking the slide.

 

AFG Prep:

1. Cut a Glock 15rd magazine spring in half.

2. Insert the mag spring into the AFG mount.

3. Insert the AFG grip into the mount (do not compress).

4. Secure with M3-35 SHCS and a nut.

5. Attach to the frame picatinny rail with M5-35 SHCS and nuts.

 

Carry Handle:

1. Compress Left and Right Releases together through the carry handle holes, with the rounded face forward.

2. Join left and right releases with 2x M3-35 SHCS and nuts.

3. Place AR-15 Buffer Detent Spring in the Carry Handle Spring Detent, and pass both through the front hole with the spring facing forward.

4. Secure with the Carry Handle Spring Retainer and M3-12 SHCS and nut.

5. Attach carry handle with 3x M3-35 SHCS and nuts.

 

Folder:

1. Insert an M3-25 SHCS and nut into the latch cavity of the Folder Pivot.

2. Attach the 1.5" hinge, with the protruding side of the hinge away from the model, using M4 nuts and bolts.

3. Attach the Folder Pivot to the frame and carry handle with 2x M5-20 SHCS and a nut in the rear.

4. Bolt the other hinge flap to the Folder Spine using M4-35 SHCS and nuts.

5. Place an Ender bed spring on the Folder Spine hole, place the Release Latch on the spring, and secure with 2x M3-35 SHCS and nuts.

6. Attach the shell (stock or brace or otherwise) of your choosing to the Folder Spine with 4x M3-25 SHCS and nuts.

 

Important: Don't shoot your eye out!

Download

creator

Metrics

Views

2.5K

Downloads

114

Project Info

release date

Oct 18, 2024

artifact type

CAD Object

library category

Printable Firearms

fabrication method

Primarily Printable

release country

United States

language

English

license

No license

Firearm Info

type

Pistol

files

File Extension
Unseenkiller - UFG9.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.