Creator: shadowfall
Version: 1.2
Description: The Vanguard series is designed to minimize support material and add ease of printing to the lower design.
Instructions: Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders.
Changelog Vanguard 1.2
*fixed overhang in trigger pocket so trigger springs function
*smoothed rough edges near bolt hold open.
Changelog Vanguard 1.1
* fixed cosmetic defects near mag release
Changelog Vanguard 1.0
* based off the hermes 1.3.3 model
* increased depth of front take down lug recess.
* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
* expanded buffer end plate hole.
* redesigned magwell profile for ease of printing.
* removed majority of fillets.
* reprofiled the buffer reinforcement to reduce support required.
File | Extension |
---|---|
Vanguard_Lower_Receiver_v1.2-shadowfall.zip | zip |
Version: 1.2.0 latest
initial upload
Creator: shadowfall
Version: 1.2
Description: The Vanguard series is designed to minimize support material and add ease of printing to the lower design.
Instructions: Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders.
Changelog Vanguard 1.2
*fixed overhang in trigger pocket so trigger springs function
*smoothed rough edges near bolt hold open.
Changelog Vanguard 1.1
* fixed cosmetic defects near mag release
Changelog Vanguard 1.0
* based off the hermes 1.3.3 model
* increased depth of front take down lug recess.
* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
* expanded buffer end plate hole.
* redesigned magwell profile for ease of printing.
* removed majority of fillets.
* reprofiled the buffer reinforcement to reduce support required.
741
81
Jan 22, 2024
3D Printer
United States
English
No license
File | Extension |
---|---|
Vanguard_Lower_Receiver_v1.2-shadowfall.zip | zip |
Version: 1.2.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.