A Silly Surprise (A.S.S.)
about
A Silly Surprise (A.S.S.): Laffs Dynamics
A refinement of the "Moms Demand Full Auto" 3D-Printable Swift Link. Uses less material and takes less time to print.
Functions the exact same as the MDFA Swift Link. Functions with a full auto BCG.
"When the officer stops you, tell'm you got A Silly Surprise for him."
"You could say there's some A.S.S. behind that gat"
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 80%+
Support Material Percentage: 20%
Notes:
1) Tested in PLA+, but its highly recommended to be printed in glass filled nylon for better durability.
Credit:
FreeMenDontAsk: Original creator of the Mom's Demand Full Auto Swift Link.
REDACTED/Anon: Printed and tested the design.
files
| File | Extension |
|---|---|
| A.S.S Device.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
A Silly Surprise (A.S.S.): Laffs Dynamics
A refinement of the "Moms Demand Full Auto" 3D-Printable Swift Link. Uses less material and takes less time to print.
Functions the exact same as the MDFA Swift Link. Functions with a full auto BCG.
"When the officer stops you, tell'm you got A Silly Surprise for him."
"You could say there's some A.S.S. behind that gat"
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 80%+
Support Material Percentage: 20%
Notes:
1) Tested in PLA+, but its highly recommended to be printed in glass filled nylon for better durability.
Credit:
FreeMenDontAsk: Original creator of the Mom's Demand Full Auto Swift Link.
REDACTED/Anon: Printed and tested the design.
creator
Metrics
Views
4.3K
Downloads
468
Project Info
release date
May 2, 2023
artifact type
Stereolithic object
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| A.S.S Device.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
