The BGO (Bootleg Grenade Defensive) is a model based on the RGO 78 grenade (Ручная граната Оборона 78) which uses a western style fuse that is made of plastic. It uses a body similar to the RGD5 and the fuses are interchangeable.
This model consists of a replica body printable in two parts that is threaded 5/8-11" and will fit standard M228 or M213 fuses, and a printable head that uses modified M228 components. The spoon needs the side flanges on the top surface removed to make room for the embossed text on the side of the fuse.
The printable fuse head must be printed at high infill and can only use small pistol primers or similar.
File | Extension |
---|---|
BGO78 Grenade.zip | zip |
Version: 1.0.0 latest
initial upload
The BGO (Bootleg Grenade Defensive) is a model based on the RGO 78 grenade (Ручная граната Оборона 78) which uses a western style fuse that is made of plastic. It uses a body similar to the RGD5 and the fuses are interchangeable.
This model consists of a replica body printable in two parts that is threaded 5/8-11" and will fit standard M228 or M213 fuses, and a printable head that uses modified M228 components. The spoon needs the side flanges on the top surface removed to make room for the embossed text on the side of the fuse.
The printable fuse head must be printed at high infill and can only use small pistol primers or similar.
1.1K
108
May 21, 2024
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
BGO78 Grenade.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.