Min-FXL-QD Pistol Brace: Laffs Dynamics
Designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
File | Extension |
---|---|
Min-FXL-QD.zip | zip |
Version: 1.0.0 latest
Initial release
Min-FXL-QD Pistol Brace: Laffs Dynamics
Designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
1.1K
99
Jan 13, 2023
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Min-FXL-QD.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.