Talon M-Lok (Elongated) AFG
about
Talon M-Lok (Elongated) AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
8mm longer than the original design by customer request.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 55C
- First Layer Print Height: .2mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 5+
- Infill: 28%
- Support Material Percentage: 30%
- Print the grip upside down.
Hardware Required:
- 2x M5x10 Hex Socketed Machine Screw/Bolt
- 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
BurritoBowl762: Requested a variant of the original design that would be slightly longer.
files
| File | Extension |
|---|---|
| Talon (Elongated) AFG.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Talon M-Lok (Elongated) AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Curved heel with a sharp angled toe.
8mm longer than the original design by customer request.
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 55C
- First Layer Print Height: .2mm
- Standard Layer Height: .16mm
- Wall Thickness: .40
- Wall Perimeters: 5+
- Infill: 28%
- Support Material Percentage: 30%
- Print the grip upside down.
Hardware Required:
- 2x M5x10 Hex Socketed Machine Screw/Bolt
- 2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested a similar design creation. Gave aesthetic opinions. Provided design parameters for overall size.
BurritoBowl762: Requested a variant of the original design that would be slightly longer.
creator
Metrics
Views
612
Downloads
68
Project Info
release date
May 29, 2024
artifact types
Stereolithic object, Printable project
library category
fabrication method
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Talon (Elongated) AFG.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
