CTRLPew & Deterrence Dispersed Presents Ctrlpew's Shoulder Thing That Goes Up A 3D printable pistol brace compatible with standard AR buffer tubes. #Licensure - CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/ The original CAD models are included here, please feel free to modify them according to the licenseing listed above. ##NonPrintables 2x m4 x 25 bolt and nuts 1x 1" 10-24 bolt and nut 2x 6mm dia 2mm thick magnets - https://amzn.to/3ktqOqk ##Print Instructions Orientation - Each part has a flat face. Stick that to the bed. Material - PLA+ (not really important) Shell or Walls/Top/Bottom - 5 Infill - 30%+ Support - Everywhere Layer Height - .2 Visit me online to keep up with the shennanigans. https://ctrlpew.com/all-the-links/ Support our shennanigans shop.ctrlpew.com Join in the fun keybase.io/team/det_disp.