10-22 Barrel Retention V-Block: FFFTech/FFFTechnology
Self explanatory. Once barrel is pressed in the receiver, install this via two 12-24 bolts V-Block bolts. (Can be found on Amazon.com)
Idk, its a friggin V-Block. Waddaya want from me; an instructional DVD? Just print the damn thing.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 6
Infill: 60%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
2x V-Block Bolts
File | Extension |
---|---|
10-22 V-Block V1.0.1.zip | zip |
Version: 10-22 Barrel Retention V-Block V.0.1 latest
10-22 Barrel Retention V-Block V.0.1: Laffs Dynamics
Self explanatory. Once barrel is pressed in the receiver, install this via two 12-24 V-Block bolts. (Can be found on Amazon.com)
Idk, its a friggin V-Block. Waddaya want from me; an instructional DVD? Just print the damn thing.
Update V1.0.1: Updated recommended printing materials, changed recommended print settings for better device strength, updated name of designer.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 60%+
Support Material Percentage: 20%
Hardware Needed:
2x V-Block Bolts
Version: 1.0.0
10-22 Barrel Retention V-Block: FFFTech/FFFTechnology
Self explanatory. Once barrel is pressed in the receiver, install this via two 12-24 bolts V-Block bolts. (Can be found on Amazon.com)
Idk, its a friggin V-Block. Waddaya want from me; an instructional DVD? Just print the damn thing.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 6
Infill: 60%
Infill Pattern: Gyroid
Material Flow: 100%
Hardware Needed:
2x V-Block Bolts
3.2K
383
Jan 04, 2023
United States
English
File | Extension |
---|---|
10-22 V-Block V1.0.1.zip | zip |
Version: 10-22 Barrel Retention V-Block V.0.1 latest
10-22 Barrel Retention V-Block V.0.1: Laffs Dynamics
Self explanatory. Once barrel is pressed in the receiver, install this via two 12-24 V-Block bolts. (Can be found on Amazon.com)
Idk, its a friggin V-Block. Waddaya want from me; an instructional DVD? Just print the damn thing.
Update V1.0.1: Updated recommended printing materials, changed recommended print settings for better device strength, updated name of designer.
Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon
Print Settings:
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 8+
Infill: 60%+
Support Material Percentage: 20%
Hardware Needed:
2x V-Block Bolts
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.