10/22 3/9 Blast Vent Brake
about
10/22 3/9 Blast Vent Brake: FFFTech/FFFTechnology
A tapered, long muzzle break with gas redirection vents on the 3 and 9 o clock postions of the device.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to
print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be
used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
files
| File | Extension |
|---|---|
| 10-22 3-9 Blast Vent Brake.zip | zip |
versions
Version: 1.0.0 latest
about
10/22 3/9 Blast Vent Brake: FFFTech/FFFTechnology
A tapered, long muzzle break with gas redirection vents on the 3 and 9 o clock postions of the device.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to
print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be
used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
creator
Metrics
Views
1.8K
Downloads
212
Project Info
release date
Jan 09, 2022
artifact type
library category
fabrication method
release country
United States
language
English
license
version hash
QmTecdy7ymjv3e8kiSnbPD6q3hjqmj2XCE8MDx7t22nMC7
files
| File | Extension |
|---|---|
| 10-22 3-9 Blast Vent Brake.zip | zip |
versions
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
