10/22 Blaster Compensator: FFFTech/FFFTechnology
A muzzle compensator with three elongated vents along the top, enclosed at the bottom. Designed with retro Sci-Fi gun muzzle aesthetics.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
File | Extension |
---|---|
10-22 Blaster Comp.zip | zip |
Version: 1.0.0 latest
Initial release
10/22 Blaster Compensator: FFFTech/FFFTechnology
A muzzle compensator with three elongated vents along the top, enclosed at the bottom. Designed with retro Sci-Fi gun muzzle aesthetics.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
1.3K
122
Jun 2022
3D Printer
United States
English
QmVPSxYdpZUAQEXuDx2C5LPe5oTDa2NomFNqKqNU5exhVV
File | Extension |
---|---|
10-22 Blaster Comp.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.