10/22 Gothic Compensator
about
10/22 Gothic Compensator: FFFTech/FFFTechnology
A muzzle compensator with six scalloped ports angled upwards, with 5 short prongs at the tip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
files
| File | Extension |
|---|---|
| 10-22 Gothic Comp.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
10/22 Gothic Compensator: FFFTech/FFFTechnology
A muzzle compensator with six scalloped ports angled upwards, with 5 short prongs at the tip.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
creator
Metrics
Views
1.4K
Downloads
142
Project Info
release date
Jun 27, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmZ1KzfrWg8yBRMwju6RPGQ2ibiQYEyj93M1yPRpmDcHEd
files
| File | Extension |
|---|---|
| 10-22 Gothic Comp.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
