10/22 Trigger Pack CAD Template V1.1: FFFTech/FFFTechnology
STL and STEP files of a 10/22 Trigger Pack template. Able to be easily modified if
one wishes.
Originally designed by an anonymous member of FossCAD. Whilst most of the design measurements were quite accurate to the OEM version, much of the geometry near the front (near the trigger release space) was missing. I measured an OEM Ruger 10/22 trigger pack and edited the file with the correct geometry.
The comparison pics show the original FossCAD version in grey, and the edited version in
white. (In the Images folder)
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,
they're mainly meant to be used in CAD software such as Fusion 360.
Update V1.1: Stretched the top faces of the side protrusions on the trigger pack.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 210C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 28%
Infill Pattern: Gyroid
Material Flow: 100%
Accreditation:
FossCAD, specifically to the anonymous member that created the original trigger pack.
File | Extension |
---|---|
10-22 Trigger Pack Template V1.1.zip | zip |
Version: 1.0.0 latest
10/22 Trigger Pack CAD Template V1.1: FFFTech/FFFTechnology
STL and STEP files of a 10/22 Trigger Pack template. Able to be easily modified if
one wishes.
Originally designed by an anonymous member of FossCAD. Whilst most of the design measurements were quite accurate to the OEM version, much of the geometry near the front (near the trigger release space) was missing. I measured an OEM Ruger 10/22 trigger pack and edited the file with the correct geometry.
The comparison pics show the original FossCAD version in grey, and the edited version in
white. (In the Images folder)
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed,
they're mainly meant to be used in CAD software such as Fusion 360.
Update V1.1: Stretched the top faces of the side protrusions on the trigger pack.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 210C
Bed: 54C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 28%
Infill Pattern: Gyroid
Material Flow: 100%
Accreditation:
FossCAD, specifically to the anonymous member that created the original trigger pack.
7.4K
Nov 17, 2021
United States
English
QmVWoxpLAMHJD6MeeKHM3CUGNFmmNpcX6emwdyQr4VCXpA
File | Extension |
---|---|
10-22 Trigger Pack Template V1.1.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.