Vulture AKM Grip
about
Vulture AKM Grip: FFFTech/FFFTechnology
An AKM grip with a sloped backstrap, and round butt. The front section is concave that ends with a sharp toe.
Swells from 24.2mm at the grip's mount point, to 26.8mm towards the bottom.
Comes in three variants:
*Standard
*Ridged
*Reverse Panel
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
files
| File | Extension |
|---|---|
| Vulture AKM Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Vulture AKM Grip: FFFTech/FFFTechnology
An AKM grip with a sloped backstrap, and round butt. The front section is concave that ends with a sharp toe.
Swells from 24.2mm at the grip's mount point, to 26.8mm towards the bottom.
Comes in three variants:
*Standard
*Ridged
*Reverse Panel
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
creator
Metrics
Views
1.6K
Downloads
166
Project Info
release date
May 05, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmWr6npd53xaNrjsLjp2pm7f7LwTAQ6Gqocun2q1WjFJJt
files
| File | Extension |
|---|---|
| Vulture AKM Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
