"Mountain Scout" Compact Fixed Carbine Buttstock
about
"Mountain Scout" Compact Fixed Carbine Buttstock: Laffs Dynamics
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by 24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
files
| File | Extension |
|---|---|
| Mountain Scout Compact.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
"Mountain Scout" Compact Fixed Carbine Buttstock: Laffs Dynamics
A compact version of the Laffs Dynamics original Mountain Scout Compact Fixed Carbine Buttstock. Reduced in overall length by 24mm. (Roughly 1in.)
Has a single 34mm long, vertical sling loop.
Comes with two buttpads:
* Standard, 8mm thick
* Extended, 18mm thick
This buttstock is designed for Milspec Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .2mm
Wall Perimeters: 5+
Infill: 25%+
Material Flow: 100%
NO support material is needed.
Hardware Needed:
1x M8x10 Hex Socketed Set Screw
2x M4x12 Screws
creator
Metrics
Views
1.8K
Downloads
245
Project Info
release date
Sep 15, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
files
| File | Extension |
|---|---|
| Mountain Scout Compact.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
