DD17.2 GXL Crusher
about
Hello, thanks for checking out my custom Glock Frame! This frame uses DD17.2 Glock 17 rail inserts and a gen 5 slide lock spring. It also requires 2 M4x30mm bolts and 2 M4 nuts.
There are 4 versions of the frame included and 2 printable muzzle devices.
I recommend printing the frame in PLA+/Pro or stronger using at least 8 walls/100% infill, you can also print the muzzle devices in PLA+/Pro but they may be prone to heat warp during extreme use.
For strongest results I suggest printing the muzzle-devices in HTPLA and annealing them.
My personal builds were annealed at 200F for 1.5hrs and have survived several hundreds rounds of 115/124gr 9mm.
Do not overtighten the M4 nuts as it may damage the frame, blue loctite is recommended for long term use.
Do not use a threaded barrel as it will hit the roof of the muzzle device. Flush barrels tends to expell gas between the slide face and muzzle as well but will work fine otherwise.
Ultimately a factory length barrel will work the best.
Questions? Comments? Concerns? Let me know on twitter @ProSpaceDog
files
| File | Extension |
|---|---|
| DD17.2_GXL_Crusher.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Hello, thanks for checking out my custom Glock Frame! This frame uses DD17.2 Glock 17 rail inserts and a gen 5 slide lock spring. It also requires 2 M4x30mm bolts and 2 M4 nuts.
There are 4 versions of the frame included and 2 printable muzzle devices.
I recommend printing the frame in PLA+/Pro or stronger using at least 8 walls/100% infill, you can also print the muzzle devices in PLA+/Pro but they may be prone to heat warp during extreme use.
For strongest results I suggest printing the muzzle-devices in HTPLA and annealing them.
My personal builds were annealed at 200F for 1.5hrs and have survived several hundreds rounds of 115/124gr 9mm.
Do not overtighten the M4 nuts as it may damage the frame, blue loctite is recommended for long term use.
Do not use a threaded barrel as it will hit the roof of the muzzle device. Flush barrels tends to expell gas between the slide face and muzzle as well but will work fine otherwise.
Ultimately a factory length barrel will work the best.
Questions? Comments? Concerns? Let me know on twitter @ProSpaceDog
creator
Metrics
Views
1.7K
Downloads
135
Project Info
release date
Nov 13, 2023
artifact types
CAD Object, Stereolithic object, Printable project, DIY Project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
No license
Firearm Info
type
Pistol
platform
Glock 17
part
Frame
files
| File | Extension |
|---|---|
| DD17.2_GXL_Crusher.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
