Project Lotus Printable MAC-11 Lower
about
Project Lotus from Freedom Dev Co is a modification of the Scarab MAC-11 lower, meant to work with the (included) Freedom Dev Co MAC-11 Printable Upper.
Hardware for this frame is as follows:
- 1x 1776 & Co.
- 2x Trigger/Hammer Pins M4x50 Bolts
- 2x Trigger/Hammer Pins M4 Hex Nuts
Firearms parts required for the frame are:
- 1x Velocity / MPA MAC-11 LPK
Full hardware kits for both Project Lotus and the Freedom Dev Co Upper can be purchased from 1776 Supply Co.
Note that this frame is not designed to work with aftermarket MAC-11 uppers. Standard uppers may work with a special adapter.
files
| File | Extension |
|---|---|
| Freedom Co Mac Upper/README.txt | txt |
| Freedom Co Mac Upper/F.C. PRINTABLE MAC11 UPPER RECEIVER.stl | stl |
| Freedom Co Mac Upper/! PROJECT OBSIDIAN - GUIDE !.pdf | |
| README.txt | txt |
| MAG CATCH.stl | stl |
| LOWER RECEIVER.stl | stl |
| BARREL SHROUD.stl | stl |
versions
Version: 1.0.0 latest
Initial release
about
Project Lotus from Freedom Dev Co is a modification of the Scarab MAC-11 lower, meant to work with the (included) Freedom Dev Co MAC-11 Printable Upper.
Hardware for this frame is as follows:
- 1x 1776 & Co.
- 2x Trigger/Hammer Pins M4x50 Bolts
- 2x Trigger/Hammer Pins M4 Hex Nuts
Firearms parts required for the frame are:
- 1x Velocity / MPA MAC-11 LPK
Full hardware kits for both Project Lotus and the Freedom Dev Co Upper can be purchased from 1776 Supply Co.
Note that this frame is not designed to work with aftermarket MAC-11 uppers. Standard uppers may work with a special adapter.
creator
Metrics
Views
4.4K
Downloads
373
Project Info
mod parent
release date
Feb 21, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| Freedom Co Mac Upper/README.txt | txt |
| Freedom Co Mac Upper/F.C. PRINTABLE MAC11 UPPER RECEIVER.stl | stl |
| Freedom Co Mac Upper/! PROJECT OBSIDIAN - GUIDE !.pdf | |
| README.txt | txt |
| MAG CATCH.stl | stl |
| LOWER RECEIVER.stl | stl |
| BARREL SHROUD.stl | stl |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
