Picatinny Accessory Mount CAD Template by FFFTech/FFFTechnology
STL and STEP files of an accessory mount template that attaches to 1913 Picatinny rails. I designed this model myself for developing accessories for modern carbines and the like.
These files are intended to aid in firearm accessory design. Whilst they can be 3D printed, they're mainly meant to be used in CAD software such as Fusion 360.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
First Layer Print Height: .22mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 3
Infill Pattern: Gyroid
Material Flow: 100%
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1) Press the M5 hex nut into it's indexing socket.
2) With the hex nut installed, slide the template onto the rail and align the bolt channel with the preferred rail slot of installation.
3) Drive the bolt through the channel and start threading into the hex nut.
4) Tighten the bolt into the hex nut until the template is mounted firmly in place. The end of bolt shouldn't protrude past the hex nut indexing slot. Avoid over tightening the bolt.