Split Angle AKM Grips
about
Split Angle AKM Grips: FFFTech/FFFTechnology
An AKM with a grip angle of 104° at it's top portion, and is 90° towards the bottom.
Comes in two variants:
*Standard
*Ridged
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
files
| File | Extension |
|---|---|
| Split Angle AKM Grips.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Split Angle AKM Grips: FFFTech/FFFTechnology
An AKM with a grip angle of 104° at it's top portion, and is 90° towards the bottom.
Comes in two variants:
*Standard
*Ridged
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
creator
Metrics
Views
1K
Downloads
114
Project Info
release date
Jan 12, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
Firearm Info
type
Rifle
platform
AK-47
part
Grip
version hash
QmS9ve8q8T8KDJRCktX6bxZJ2wGKEGpeYrG1QnUiR4Tz1P
files
| File | Extension |
|---|---|
| Split Angle AKM Grips.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
