Rook Micro M-Lok VFG

ATTENTION: this project has been marked as deprecated. This may mean that the project is considered unsafe, is not representative of a developer's newer work, or it does not meet modern guncad standards. For historical purposes it remains available for download.

about

Rook Micro M-Lok VFG: FFFTech/FFFTechnology

A micro VFG, designed for compact PDWs such as:

 *Sig MCX Rattler
 *MP5K (if using M-Lok Handguard)
 *CZ Scorpion EVO 3 S2 Pistol Micro
 *Ruger PC Charger

Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be difficult with a full sized foregrip.

Comes in three varieties: 

 *Standard
 *Chess Tiled
 *Ridged

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 216C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%


Print the VFG right-side up


Hardware Needed: 

2x M5x10 Hex Socketed Machine Screw/Bolt

2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)

files

File Extension
Rook Micro VFG.zip zip

versions

Version: 1.0.0 latest

Initial release

about

ATTENTION: this project has been marked as deprecated. This may mean that the project is considered unsafe, is not representative of a developer's newer work, or it does not meet modern guncad standards. For historical purposes it remains available for download.

Rook Micro M-Lok VFG: FFFTech/FFFTechnology

A micro VFG, designed for compact PDWs such as:

 *Sig MCX Rattler
 *MP5K (if using M-Lok Handguard)
 *CZ Scorpion EVO 3 S2 Pistol Micro
 *Ruger PC Charger

Also the design works well for AK "Kink" builds that use M-Lok forends, as the insertion/removal of mags can be difficult with a full sized foregrip.

Comes in three varieties: 

 *Standard
 *Chess Tiled
 *Ridged

Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 216C 
Bed: 56C 
First Layer Print Height: .20mm 
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%


Print the VFG right-side up


Hardware Needed: 

2x M5x10 Hex Socketed Machine Screw/Bolt

2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)

download

Metrics

Views

2.3K

Project Info

release date

Dec 21, 2021

artifact type

Printable project

library category

Printable Peripherals / Parts

fabrication method

Primarily Printable

release country

United States

language

English

license

GNU General Public License v3.0

version hash

QmeerBcU1oZzgg1xnby5woazBduuApqABctNZKgeNRyA8q

files

File Extension
Rook Micro VFG.zip zip

versions

Version: 1.0.0 latest

Initial release

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.