22 Short Dummy Cartridge: Laffs Dynamics
3D printed dummy round, dimensions of a .22 Short cartridge. Due to issues of rimfires breaking their firing pins over time from dry firing repeatedly, snap caps are advised for use. 3DP 22 Short snap caps are cheap and quick to reprint.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 35% - 50%
Material Flow: 100%
(Highly advisable to print 5+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
File | Extension |
---|---|
22 Short Dummy Cartridge.zip | zip |
Version: 1.0.0 latest
Initial release
22 Short Dummy Cartridge: Laffs Dynamics
3D printed dummy round, dimensions of a .22 Short cartridge. Due to issues of rimfires breaking their firing pins over time from dry firing repeatedly, snap caps are advised for use. 3DP 22 Short snap caps are cheap and quick to reprint.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 35% - 50%
Material Flow: 100%
(Highly advisable to print 5+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
1.7K
182
Sep 29, 2022
Printable Peripherals / Parts, Ammunition
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
File | Extension |
---|---|
22 Short Dummy Cartridge.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.