22LR Snap Caps V1.0.1: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a .22 Long Rifle cartridge. Due to issues of rimfires breaking their firing pins over time from dry firing repeatedly, snap caps are advised for use. 3DP 22LR snap caps are cheap and quick to reprint.
Comes in two variants:
*Round Nose
*Truncated Nose
Update: Fixed the advised scaling setting; originally stated to scale +/- .1%, but the intended scaling was meant to be +/- .01%
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 35% - 50%
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 5+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
File | Extension |
---|---|
22LR Snap Cap V1.0.1.zip | zip |
Version: 1.0.0 latest
22LR Snap Caps V1.0.1: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a .22 Long Rifle cartridge. Due to issues of rimfires breaking their firing pins over time from dry firing repeatedly, snap caps are advised for use. 3DP 22LR snap caps are cheap and quick to reprint.
Comes in two variants:
*Round Nose
*Truncated Nose
Update: Fixed the advised scaling setting; originally stated to scale +/- .1%, but the intended scaling was meant to be +/- .01%
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 35% - 50%
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 5+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
3.4K
451
Mar 07, 2022
United States
English
QmSaFuKgGFv8cpvyh92FbHP7BST396gAcHMJ9V2F79GfPQ
File | Extension |
---|---|
22LR Snap Cap V1.0.1.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.