Lightweight Minimalist Pistol Brace (LMPB)
about
Lightweight Minimalist Pistol Brace (LMPB) by FFFTech/FFFTechnology A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort. This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only. Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 204C Bed: 54C First Layer Print Height: .22mm Standard Layer Height: .18mm Wall Thickness: .40 Wall Perimeters: 4 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x M8x12 Hex Socketed Set Screw Installation 1) Press the hollow socket of the brace on the end of the carbine buffer tube. 2) Select one of three index points for the the brace's position. 3) Once a position is chosen, thread the set screw through the brace, into the index point.
files
| File | Extension |
|---|---|
| Min Pistol Brace V1.2.5.zip | zip |
versions
Version: Min Pistol Brace V1.2.5 latest
Min Pistol Brace V1.2.5: Laffs Dynamics
A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort.
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.2.5: Changed model designation. Added 2022 styl Laffs logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Installation
1) Press the hollow socket of the brace on the end of the carbine buffer tube.
2) Select one of three index points for the the brace's position.
3) Once a position is chosen, thread the set screw through the brace, and into the index point.
Version: Lightweight Minimal Pistol Brace V1.1.4
Lightweight Minimal Pistol Brace (LMPB) V1.1.4: Laffs Dynamics
A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort.
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.1.4: Removed incorrectly modeled geometry. Updated print settings based off the more common Ender 3 3D printers. Updated name of designer. Organized the data pack layout to current 2022 standards. Removed uneeded images.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Installation
1) Press the hollow socket of the brace on the end of the carbine buffer tube.
2) Select one of three index points for the the brace's position.
3) Once a position is chosen, thread the set screw through the brace, and into the index point.
Version: 1.0.0
about
Lightweight Minimalist Pistol Brace (LMPB) by FFFTech/FFFTechnology A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort. This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only. Printer Used: Monoprice Maker Select Plus Filament Used: PLA+ Print Settings: Extruder: 204C Bed: 54C First Layer Print Height: .22mm Standard Layer Height: .18mm Wall Thickness: .40 Wall Perimeters: 4 Infill: 25% Infill Pattern: Gyroid Material Flow: 100% Hardware Needed: 1x M8x12 Hex Socketed Set Screw Installation 1) Press the hollow socket of the brace on the end of the carbine buffer tube. 2) Select one of three index points for the the brace's position. 3) Once a position is chosen, thread the set screw through the brace, into the index point.
creator
Metrics
Views
7.6K
Project Info
release date
Jan 13, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| Min Pistol Brace V1.2.5.zip | zip |
versions
Version: Min Pistol Brace V1.2.5 latest
Min Pistol Brace V1.2.5: Laffs Dynamics
A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort.
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.2.5: Changed model designation. Added 2022 styl Laffs logo.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Installation
1) Press the hollow socket of the brace on the end of the carbine buffer tube.
2) Select one of three index points for the the brace's position.
3) Once a position is chosen, thread the set screw through the brace, and into the index point.
Version: Lightweight Minimal Pistol Brace V1.1.4
Lightweight Minimal Pistol Brace (LMPB) V1.1.4: Laffs Dynamics
A three position adjustable, minimalist styled AR-15 pistol blade brace that attaches to a Mil-Spec six position adjustable stock. Uses little material, (Compared to many other 3DP designs) and is rounded on all edges for forearm comfort.
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Update V1.1.4: Removed incorrectly modeled geometry. Updated print settings based off the more common Ender 3 3D printers. Updated name of designer. Organized the data pack layout to current 2022 standards. Removed uneeded images.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
Installation
1) Press the hollow socket of the brace on the end of the carbine buffer tube.
2) Select one of three index points for the the brace's position.
3) Once a position is chosen, thread the set screw through the brace, and into the index point.
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
