26.5mm / 12ga Flare Launcher
about
These are the printed parts for a 26.5mm or 12 ga flare launcher
Additional parts needed
- Ar hammer and spring
- ar trigger and spring
- ar grip and screw
- ar selector with detente pin and spring
- 10/22 recoil spring, guide ring and guide rod (no charging handle though)
- Russian tokarev firing pin and spring (Chinese is 1.5mm too short to work)
- 6x 6x32 3/4" socket head screws
- 1x 6x32 1" socket head screw
- 1x 1/4 OD 1" long "sex bolt" with screw heads under 1/2"
- compression springs for the plunger and latch (must be fitted, I cant give specific size.)
Also recommended is an aluminum 26.5mm to 12 ga flare adapter to prevent melting or burning the bore.
files
| File | Extension |
|---|---|
| plunger.stl | stl |
| latch.stl | stl |
| impTokReceiver.stl | stl |
| dustCover.stl | stl |
| chargingHandle.stl | stl |
| bolt.stl | stl |
| README.txt | txt |
| 265to12gaugeBBL.stl | stl |
versions
Version: 1.0.0 latest
about
These are the printed parts for a 26.5mm or 12 ga flare launcher
Additional parts needed
- Ar hammer and spring
- ar trigger and spring
- ar grip and screw
- ar selector with detente pin and spring
- 10/22 recoil spring, guide ring and guide rod (no charging handle though)
- Russian tokarev firing pin and spring (Chinese is 1.5mm too short to work)
- 6x 6x32 3/4" socket head screws
- 1x 6x32 1" socket head screw
- 1x 1/4 OD 1" long "sex bolt" with screw heads under 1/2"
- compression springs for the plunger and latch (must be fitted, I cant give specific size.)
Also recommended is an aluminum 26.5mm to 12 ga flare adapter to prevent melting or burning the bore.
creator
Metrics
Views
3.7K
Downloads
365
Project Info
release date
Mar 05, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
language
English
license
No license
version hash
QmccNjEYZd6cMJchg6ZMZGyG4bvBScYaUG89hLB6JWrAf3
files
| File | Extension |
|---|---|
| plunger.stl | stl |
| latch.stl | stl |
| impTokReceiver.stl | stl |
| dustCover.stl | stl |
| chargingHandle.stl | stl |
| bolt.stl | stl |
| README.txt | txt |
| 265to12gaugeBBL.stl | stl |
versions
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
