"Soviet Skewer" 10mm AKM Spike Bayonet

about

"Soviet Skewer" 10mm AKM Spike Bayonet: Laffs Dynamics

 

10mm diameter rod variant of the original Laffs Dynamics Soviet Skewer AKM Spike Bayonet. 

 

 

 

Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon

 

Print Settings:

 

First Layer Print Height: .20mm 

Standard Layer Height: .16mm

Wall Thickness: .40 

Wall Perimeters: 8+

Infill: 50%+

Support Material Percentage: 20%

 

 

Supports only needed for under the locking tab for the bayonet lug. 

 

Print the mount on it's front face. 

 

 

 

Hardware Needed:

 

*10mm x 300mm Steel Rod (Recommended to cut down to 275mm)

 

*2 Part Epoxy

 

 

 

Tools Needed: 

 

*40 Grit Sandpaper (Rough tip forming)

 

*150 Grip Sandpaper (Fine tip forming and surface finishing)

 

*Sanding Belt (Optional, if you don't want to hand sand, and have one.)

 

*Rotary Tool

 

*Rotary Tool Sanding Drum (For rounding the spike tip)

 

 

 

Notes:

 

Due to the heat given off from firing an AK, it's highly recommended this design be treated as a: "No ammo left, 

affix bayonets!", type tool. The muzzle ring is overbuilt to handle impact and some heat stress, and should be 

fine being attached whilst firing a small amount of rounds, but mag dumping will inevitably melt the muzzle ring. 

files

File Extension
Soviet Skewer 10mm.zip zip

versions

Version: 1.0.0 latest

initial upload

about

"Soviet Skewer" 10mm AKM Spike Bayonet: Laffs Dynamics

 

10mm diameter rod variant of the original Laffs Dynamics Soviet Skewer AKM Spike Bayonet. 

 

 

 

Filament Recommended: Glass Filled Nylon, Carbon Fiber Nylon

 

Print Settings:

 

First Layer Print Height: .20mm 

Standard Layer Height: .16mm

Wall Thickness: .40 

Wall Perimeters: 8+

Infill: 50%+

Support Material Percentage: 20%

 

 

Supports only needed for under the locking tab for the bayonet lug. 

 

Print the mount on it's front face. 

 

 

 

Hardware Needed:

 

*10mm x 300mm Steel Rod (Recommended to cut down to 275mm)

 

*2 Part Epoxy

 

 

 

Tools Needed: 

 

*40 Grit Sandpaper (Rough tip forming)

 

*150 Grip Sandpaper (Fine tip forming and surface finishing)

 

*Sanding Belt (Optional, if you don't want to hand sand, and have one.)

 

*Rotary Tool

 

*Rotary Tool Sanding Drum (For rounding the spike tip)

 

 

 

Notes:

 

Due to the heat given off from firing an AK, it's highly recommended this design be treated as a: "No ammo left, 

affix bayonets!", type tool. The muzzle ring is overbuilt to handle impact and some heat stress, and should be 

fine being attached whilst firing a small amount of rounds, but mag dumping will inevitably melt the muzzle ring. 

download

Metrics

Views

1.3K

Downloads

161

Project Info

release date

May 10, 2023

artifact types

Stereolithic object, DIY Project

library category

Printable Peripherals / Parts

fabrication method

Hybrid

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

Firearm Info

type

Rifle

platforms

AK-47, AKM

caliber

7.62x39

parts

Bayonet, Bayonet Mount

files

File Extension
Soviet Skewer 10mm.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.