AR/Evo Grip Adaptor (Gen 1)
about
AR/Evo Grip Adaptor (Gen 1): Laffs Dynamics
An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3 and AWCY? Sczorpion.
Reuploaded due to reports of previous corrupted files during slicing.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 20%
Print the adaptor upside-down.
Hardware Required:
1x M4x30mm Bolt
1x M4 Hex Nut
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
Accreditation:
Justinhates: For test fitting the grip adaptor, and providing images. Origin of design request.
Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.
files
| File | Extension |
|---|---|
| AR-Evo Grip Adaptor (Gen 1).zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
AR/Evo Grip Adaptor (Gen 1): Laffs Dynamics
An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3 and AWCY? Sczorpion.
Reuploaded due to reports of previous corrupted files during slicing.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 50%+
Support Material Percentage: 20%
Print the adaptor upside-down.
Hardware Required:
1x M4x30mm Bolt
1x M4 Hex Nut
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
Accreditation:
Justinhates: For test fitting the grip adaptor, and providing images. Origin of design request.
Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.
creator
Metrics
Views
1.2K
Downloads
100
Project Info
release date
Feb 5, 2024
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| AR-Evo Grip Adaptor (Gen 1).zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
