Gen 3 PMag PAP: FFFTech/FFFTechnology
A 3d printed Pull Assist Plate for Gen 3 PMags.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Support X/Y Offset: .5mm
File | Extension |
---|---|
Magpul Gen 3 PMag PAP.zip | zip |
Version: 1.0.0 latest
Initial release
Gen 3 PMag PAP: FFFTech/FFFTechnology
A 3d printed Pull Assist Plate for Gen 3 PMags.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Support X/Y Offset: .5mm
3.8K
Apr 22, 2022
3D Printer
United States
English
QmRtwSNChQz1iQy44F59KYSanW5rgFckzFzoZEdLc2Yduc
File | Extension |
---|---|
Magpul Gen 3 PMag PAP.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.