Mod Mag 20, Rough Cut (Scorpion Evo 3)
about
Mod Mag 20, Rough Cut (Scorpion Evo 3): Laffs Dynamics
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .18mm
- Wall Thickness: .40mm
- Wall Perimeters: 7+
- Infill: 50%+
- Support Material Percentage: 18%
After loading the mag body into your preferred slicer software, tilt the design backwards 25deg for better layer adhesion. (Seen in IMAGES folder included in the data pack.) Use support blockers on any embossed mag body texture, the mag body's IMA logo, and caliber designated text.
Hardware Needed:
1x Scorpion Evo 3 Spring (20rd length)
Notes:
1) The original Mod Mag 20 data pack can be found here: https://defcad.com/library/3bf98ba0-ff7d-4048-8662-54ad6e048047/
Accreditations:
Insertmeow/IMA: Developer of AWCY?'s Scz0rpion magazine; which was the base model this design was built off of.
files
| File | Extension |
|---|---|
| Mod Mag 20 Rough Cut.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Mod Mag 20, Rough Cut (Scorpion Evo 3): Laffs Dynamics
- Printer Used: Ender 3 V2
- Filament Used: PLA+
Print Settings:
- Extruder: 220C
- Bed: 56C
- First Layer Print Height: .20mm
- Standard Layer Height: .18mm
- Wall Thickness: .40mm
- Wall Perimeters: 7+
- Infill: 50%+
- Support Material Percentage: 18%
After loading the mag body into your preferred slicer software, tilt the design backwards 25deg for better layer adhesion. (Seen in IMAGES folder included in the data pack.) Use support blockers on any embossed mag body texture, the mag body's IMA logo, and caliber designated text.
Hardware Needed:
1x Scorpion Evo 3 Spring (20rd length)
Notes:
1) The original Mod Mag 20 data pack can be found here: https://defcad.com/library/3bf98ba0-ff7d-4048-8662-54ad6e048047/
Accreditations:
Insertmeow/IMA: Developer of AWCY?'s Scz0rpion magazine; which was the base model this design was built off of.
creator
Metrics
Views
1.1K
Downloads
175
Project Info
release date
Aug 04, 2023
artifact types
CAD Object, Stereolithic object, Printable project
library category
fabrication methods
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
files
| File | Extension |
|---|---|
| Mod Mag 20 Rough Cut.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
