EZ Gun Drill
about
This is a low cost way to bore deep holes without having deep pockets. So far I've drilled 8in, but I'm sure it can drill 16in+.
Here's how it works: Tension on the springs draw the carriage back. A tool (drill bit) is inserted into the drill chuck on the carriage and the work (rod, to be barrel) is inserted into the opposing drill chuck. When tension is released the tool is pushed into the work as the work spins (turns). The advantage of springs makes it more difficult to apply too much pressure, therefore reducing deflection allowing for better concentricity.
Although, this process is quite slow compared to a lathe, you can get great results without having to spend hundreds of dollars buying a lathe just to serve one purpose of drilling bores.
files
| File | Extension |
|---|---|
| Materials List.txt | plain |
| Steady Rest.stl | stl |
| Steady Rest .357in insert.stl | stl |
| Endcap B Faltbar Template.stl | stl |
| Endcap A Flatbar Template.stl | stl |
| End Cap B.stl | stl |
| End Cap A.stl | stl |
| Carriage.stl | stl |
| Carriage Flatbar Template.stl | stl |
versions
Version: 1.0.0 latest
Initial release. Will be updating with a materials list and build instructions.
about
This is a low cost way to bore deep holes without having deep pockets. So far I've drilled 8in, but I'm sure it can drill 16in+.
Here's how it works: Tension on the springs draw the carriage back. A tool (drill bit) is inserted into the drill chuck on the carriage and the work (rod, to be barrel) is inserted into the opposing drill chuck. When tension is released the tool is pushed into the work as the work spins (turns). The advantage of springs makes it more difficult to apply too much pressure, therefore reducing deflection allowing for better concentricity.
Although, this process is quite slow compared to a lathe, you can get great results without having to spend hundreds of dollars buying a lathe just to serve one purpose of drilling bores.
organization
creator
Metrics
Views
4.8K
Downloads
469
Project Info
release date
Apr 11, 2022
artifact type
library category
fabrication method
release country
United States
language
English
license
No license
version hash
QmTvUDTiNkmPqPesp8xAuTcZtyitrLZ8s6cbeocsgpCn6a
files
| File | Extension |
|---|---|
| Materials List.txt | plain |
| Steady Rest.stl | stl |
| Steady Rest .357in insert.stl | stl |
| Endcap B Faltbar Template.stl | stl |
| Endcap A Flatbar Template.stl | stl |
| End Cap B.stl | stl |
| End Cap A.stl | stl |
| Carriage.stl | stl |
| Carriage Flatbar Template.stl | stl |
versions
Version: 1.0.0 latest
Initial release. Will be updating with a materials list and build instructions.
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
