Collaboration between me(Desert3D) and @StolenBoiStudios . The goal was a more OEM style frame for the 17 platform. Enjoy and happy fishing.
The DD17.2 Glock 17 frame is an update to FMDA’s original ‘DIY’ spec Glock frame. After having
over a year of testing, adoption, and feedback on the first-generation frames, three things became
apparent: the screw-in rear rails were a weak point of the design. The frame needed quite a few
dimensional tweaks to make assembly a little easier. And a crop of quality rail vendors (like
Avesrails.com and Riptiderails.com) had popped up to offer people commercial sales of rails, such that
an individual didn’t need to do their own rails from scratch. This project/update was aimed at solving
the first two aforementioned items by leveraging the third item, as well as by some refinements to the
design. This frame is compatible with G22 uppers!
**Note: The ‘G5Spring’ frame version uses a Glock Gen5 style spring setup for the slide latch. This
amounts to a little easier/cheaper build but is optional. Read the Shopping List section for more info.**
You can watch this assembly process on video here:
https://lbry.tv/@Ivan's_CAD_Streams:c/FMDADD17.2GlockFrameTutorial:e
Make sure you refer to the README for basic info/print settings for this frame!
File | Extension |
---|---|
OEM FMDA G17.zip | zip |
Version: 1.0.0 latest
initial upload
Collaboration between me(Desert3D) and @StolenBoiStudios . The goal was a more OEM style frame for the 17 platform. Enjoy and happy fishing.
The DD17.2 Glock 17 frame is an update to FMDA’s original ‘DIY’ spec Glock frame. After having
over a year of testing, adoption, and feedback on the first-generation frames, three things became
apparent: the screw-in rear rails were a weak point of the design. The frame needed quite a few
dimensional tweaks to make assembly a little easier. And a crop of quality rail vendors (like
Avesrails.com and Riptiderails.com) had popped up to offer people commercial sales of rails, such that
an individual didn’t need to do their own rails from scratch. This project/update was aimed at solving
the first two aforementioned items by leveraging the third item, as well as by some refinements to the
design. This frame is compatible with G22 uppers!
**Note: The ‘G5Spring’ frame version uses a Glock Gen5 style spring setup for the slide latch. This
amounts to a little easier/cheaper build but is optional. Read the Shopping List section for more info.**
You can watch this assembly process on video here:
https://lbry.tv/@Ivan's_CAD_Streams:c/FMDADD17.2GlockFrameTutorial:e
Make sure you refer to the README for basic info/print settings for this frame!
1.2K
62
Oct 20, 2024
United States
English
No license
File | Extension |
---|---|
OEM FMDA G17.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.