A printable single shot zip-gun style weapon which can chamber improvised ammunition. The striker handle located at the rear is pulled back and released to fire.
Materials:
- M5 x 120mm bolt (or length of studding)
- M5 nut
- Compression spring, 75mm long x 12-15mm wide, 1mm wire
- 10mm dia x 2mm wall Mild Steel Seamless Tube
Ammunition::
An 8mm PAK blank is modified by opening up the plastic plug using a 6mm bit. A 6mm Stainless Steel Ball Bearing is then seated into the plug and sealed with wax. The barrel is smoothbore and made from standard steel tubing.
File | Extension |
---|---|
ZAP-8 V1.rar | rar |
Version: 1.0.0 latest
Initial release
A printable single shot zip-gun style weapon which can chamber improvised ammunition. The striker handle located at the rear is pulled back and released to fire.
Materials:
- M5 x 120mm bolt (or length of studding)
- M5 nut
- Compression spring, 75mm long x 12-15mm wide, 1mm wire
- 10mm dia x 2mm wall Mild Steel Seamless Tube
Ammunition::
An 8mm PAK blank is modified by opening up the plastic plug using a 6mm bit. A 6mm Stainless Steel Ball Bearing is then seated into the plug and sealed with wax. The barrel is smoothbore and made from standard steel tubing.
5K
346
Jan 31, 2023
Printable project, Reference model
3D Printer
United States
English
No license
File | Extension |
---|---|
ZAP-8 V1.rar | rar |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.