39MM Launcher Deployed Variable Munition.
about
The LDVM is a project of mine arising from the issue in widely varying barrel sizes when it comes to civillian market launchers. The LDVM is designed so that each piece can be scaled down to the correct sizing with basic modeling software with negligible changes to the indivual pieces. The LVDM also includes a built in fuse separator already included on the interior of the payload body, and can be utilized for various purposes, from small payload delivery over limited distances to targeted disruption of line of sight.
Correct amount of powder for propulsion will vary based on weight of payload.
Required for basic assembly:
- 12GA shotgun primer
- launch charge
- industrial adhesive
Optional: Fuse (3 sec/inch reccomended), payload
files
| File | Extension |
|---|---|
| 40mm-Full-Assemly-DO_NOT_PRINT.skp | skp |
| 40MM-Payload-PF-FINAL.stl | stl |
| 40MM-Nose-Cone-PF-Final.stl | stl |
| 40MM-Casing-PF-Final.stl | stl |
versions
Version: 1.0.0 latest
Initial upload.
Default diameter if 39MM. Measure your launcher from the end of the bore to find your correct sizing and round down to the nearest 0.5MM.
If utilizing for practice with your launcher, the LDVM will do very well filled with flour.
about
The LDVM is a project of mine arising from the issue in widely varying barrel sizes when it comes to civillian market launchers. The LDVM is designed so that each piece can be scaled down to the correct sizing with basic modeling software with negligible changes to the indivual pieces. The LVDM also includes a built in fuse separator already included on the interior of the payload body, and can be utilized for various purposes, from small payload delivery over limited distances to targeted disruption of line of sight.
Correct amount of powder for propulsion will vary based on weight of payload.
Required for basic assembly:
- 12GA shotgun primer
- launch charge
- industrial adhesive
Optional: Fuse (3 sec/inch reccomended), payload
creator
Metrics
Views
2.7K
Downloads
228
Project Info
release date
Oct 24, 2023
artifact types
library categories
Ammunition, Printable Explosive Device
fabrication method
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| 40mm-Full-Assemly-DO_NOT_PRINT.skp | skp |
| 40MM-Payload-PF-FINAL.stl | stl |
| 40MM-Nose-Cone-PF-Final.stl | stl |
| 40MM-Casing-PF-Final.stl | stl |
versions
Version: 1.0.0 latest
Initial upload.
Default diameter if 39MM. Measure your launcher from the end of the bore to find your correct sizing and round down to the nearest 0.5MM.
If utilizing for practice with your launcher, the LDVM will do very well filled with flour.
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
