Kurz M-Lok Foregrips: FFFTech/FFFTechnology
Compact vertical foregrips; designed specifically to be mounted via between two half slots,
or one full slot of M-Lok.
Comes in four varieties:
*Standard
*Slotted
*Perforated
*Ridged
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Print the VFG right-side up
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
File | Extension |
---|---|
Kurz M-Lok VFG.zip | zip |
Version: 1.0.0 latest
Kurz M-Lok Foregrips: FFFTech/FFFTechnology
Compact vertical foregrips; designed specifically to be mounted via between two half slots,
or one full slot of M-Lok.
Comes in four varieties:
*Standard
*Slotted
*Perforated
*Ridged
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40mm
Wall Perimeters: 4 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Print the VFG right-side up
Hardware Needed:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
2.5K
Nov 18, 2021
United States
English
QmRzrw4qpwkSt7dynQjCgaFzhX34jmkYW4Q2U57cyYR7BH
File | Extension |
---|---|
Kurz M-Lok VFG.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.