Cross Cut 1911 Grip Panels
about
Cross Cut 1911 Grip Panels: Laffs Dynamics
A grip panel set for M1911 pistols (and compatible variants) with an interconnected cross pattern.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on
the firearm.
files
| File | Extension |
|---|---|
| Cross Cut 1911 Grip Set.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Cross Cut 1911 Grip Panels: Laffs Dynamics
A grip panel set for M1911 pistols (and compatible variants) with an interconnected cross pattern.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
GW-DD: Printed and assembled the grip panels onto their 1911. Provided images of the panels by themselves, as well as on
the firearm.
creator
Metrics
Views
2.2K
Downloads
340
Project Info
release date
Jul 11, 2022
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmXQ32VaGaY8FcywhaHxAqqzYykm4UkSbdJKKi9Yc9N2Ef
files
| File | Extension |
|---|---|
| Cross Cut 1911 Grip Set.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
