Talon Swarm M-Lok Mini AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Has a flaired grip base, and is padded on the sides, front, and back sections of the grip. The
original version requested by SwarmTech under contract.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested this design creation. Gave aesthetic opinions. Provided design parameters for overall size.
File | Extension |
---|---|
Talon Swarm AFG.zip | zip |
Version: 1.0.0 latest
Initial release
Talon Swarm M-Lok Mini AFG: Laffs Dynamics
An angled foregrip; small in size, concave in shape. Has thumb cuts and a swelled palm section.
Has a flaired grip base, and is padded on the sides, front, and back sections of the grip. The
original version requested by SwarmTech under contract.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 28%
Support Material Percentage: 30%
Print the grip upside down.
Hardware Required:
2x M5x10 Hex Socketed Machine Screw/Bolt
2x M-Lok T-Nuts (Be sure both bolt & nut are the same thread pitch.)
Accreditations:
Swarmtech: Requested this design creation. Gave aesthetic opinions. Provided design parameters for overall size.
1.4K
158
Dec 14, 2022
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Talon Swarm AFG.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.