3FTech Compact Evo Grip: FFFTech/FFFTechnology
A variant of the Balance Mini Grip, designed for the AWCY? Scz0rpion and OEM CZ Scorpion Evo 3.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt
1x M4 Hex Nut
Accreditation:
*justinhates: For the model request and instruction of specific design variations.
*Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.
File | Extension |
---|---|
Compact Evo Grip.zip | zip |
Version: 1.0.0 latest
3FTech Compact Evo Grip: FFFTech/FFFTechnology
A variant of the Balance Mini Grip, designed for the AWCY? Scz0rpion and OEM CZ Scorpion Evo 3.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt
1x M4 Hex Nut
Accreditation:
*justinhates: For the model request and instruction of specific design variations.
*Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model.
2.4K
Sep 14, 2021
United States
English
QmfTin2rCWCnCPAkvZTh1EHCV5ZvyddrTBnw3EcubjvvzR
File | Extension |
---|---|
Compact Evo Grip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.