3FTech M-Lok Full Length Handstop by FFFTech/FFFTechnology
A set of full length M-Lok rail mounted handstops.
Two separate models have been created:
Basic
Longboi (12mm longer than previous Basic)
(Longboi model pictured in the Images folder)
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4
Infill: 30%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Print the handstop upside-down
Hardware Needed:
2x M5x12 Hex Screw
2x M-Lok T-Nut
File | Extension |
---|---|
3FTech Full Length Handstop.zip | zip |
Version: 1.0.0 latest
3FTech M-Lok Full Length Handstop by FFFTech/FFFTechnology
A set of full length M-Lok rail mounted handstops.
Two separate models have been created:
Basic
Longboi (12mm longer than previous Basic)
(Longboi model pictured in the Images folder)
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 204C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 4
Infill: 30%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 25%
Print the handstop upside-down
Hardware Needed:
2x M5x12 Hex Screw
2x M-Lok T-Nut
2.6K
325
Jul 21, 2021
United States
English
QmWmyBBm6xNiQwPubAYfMebbfYMK6YPA7gHJp192cB9L9q
File | Extension |
---|---|
3FTech Full Length Handstop.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.