3FTech Mini Evo Origin Grip: FFFTech/FFFTechnology
A compact version of the 3FTech Evo Origin Grip. Designed to be used with the CZ Scorpion EVO 3 S2 Micro, as to make the weapon extremely compact and concealable when paired with a 20rd magazine.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
File | Extension |
---|---|
3FTech Evo Mini Origin Grip.zip | zip |
Version: 1.0.0 latest
3FTech Mini Evo Origin Grip: FFFTech/FFFTechnology
A compact version of the 3FTech Evo Origin Grip. Designed to be used with the CZ Scorpion EVO 3 S2 Micro, as to make the weapon extremely compact and concealable when paired with a 20rd magazine.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 54C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4 - 5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Print the grip upside-down.
Hardware Required:
1x M4x30mm Bolt (Can be ground down to 28mm so it doesn't stick out the side)
1x M4 Hex Nut
1.2K
Feb 18, 2022
3D Printer
United States
English
Qmbsp7RR8RtCg7Xam9kgiajLRSn9cz6MhQohau7XTuJu7L
File | Extension |
---|---|
3FTech Evo Mini Origin Grip.zip | zip |
Version: 1.0.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.