3FTech PDW Sights
about
3FTech PDW Sights: FFFTech/FFFTechnology
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail. The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 3 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
files
| File | Extension |
|---|---|
| Laffs PDW Sights V1.0.3.zip | zip |
versions
Version: Laffs PDW Sights V1.0.3 latest
Laffs PDW Sights V1.0.3: Laffs Dynamics
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail.
The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift
adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of
position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Update V1.0.3: Updated name of designer and design. Changed recommended print settings for better durability.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 36%+
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
Version: 1.0.0
about
3FTech PDW Sights: FFFTech/FFFTechnology
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail. The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 3 - 5
Infill: 20%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
creator
Metrics
Views
6.4K
Project Info
release date
Jun 09, 2023
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
files
| File | Extension |
|---|---|
| Laffs PDW Sights V1.0.3.zip | zip |
versions
Version: Laffs PDW Sights V1.0.3 latest
Laffs PDW Sights V1.0.3: Laffs Dynamics
A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail.
The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift
adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of
position, show the firearm it's mounted to be dropped.
Three rear drift sights are available:
*4mm U Notch
*5mm U Notch
*5.5mm Aperture
Update V1.0.3: Updated name of designer and design. Changed recommended print settings for better durability.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40mm
Wall Perimeters: 5+
Infill: 36%+
Support Material Percentage: 16%
Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.
Hardware Needed:
1x M5x30 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
1x M3x10 Set Screw
1x M3x5 Set Screw
Version: 1.0.0
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
